Course contact details
Admissions
Email:admissions@ulster.ac.uk
Phone:+44 (0)28 9536 7890
Ulster University
Cromore Road
Coleraine
BT52 1SA
Electronic Engineering
- Bachelor of Engineering (with Honours)
- 4 Years
- Full-Time
- 21 September 2027
- Undergraduate
- Belfast
Course summary
Electronics engineers are the brains behind the iPad, the mobile phone and GPS devices - in fact, any innovative piece of technology you can think of.
Every device with an electrical current running through it has been designed, built and manufactured by electronic engineers. They work closely with product designers, manufacturers and consumer experts to develop ideas for new products - it is the job of the electronic engineer to make sure they work.
Electronic engineering graduates are highly employable and can find work in areas such as electronics, automotive, IT, telecoms, manufacturing, utilities and construction.
The university has worked closely with employers to develop this BEng Hons course to prepare students for a wide range of industrial electronic roles.
Using a connected programme of study which allows you to build on the knowledge gained in each semester, this degree will prepare you to become a well-rounded engineer equipped for a wide range of roles within industry.
How to apply
Apply by
13 January 2027
This is the deadline for applications to be completed and sent for this course. If the university or college still has places available you can apply after this date, but your application is not guaranteed to be considered.
Application codes
- Course code:
- H601
- Institution code:
- U20
- Campus name:
- Belfast
Points of entry
The following entry points are available for this course:
- Year 1
Entry requirements
Typical qualification requirements
A levelBBC
To include Grade B in one from GCE A Level Mathematics, Further Mathematics, Physics, Chemistry, Technology and Design, Design and Technology, Engineering, Electronics or Double Award Science/Applied Science.
Applicants presenting GCE A Level Maths, Further Maths or Physics will receive a one grade reduction at the time of offer i.e. BCC. These subjects can be achieved at grade C or B.
See the GCSE subject and grade requirements including specific Mathematics grade required depending on the GCE A level subject presented.
Scottish HigherBBCCC
To include BB in Mathematics and a science subject.
Access to HE DiplomaDistinction: 15 Merit: 30
in Engineering/Science/Technology subject. For Ulster University validated access courses, in the same subjects, the requirement is 63% overall and 63% in NICATS Mathematics (Level 2). Equivalent Mathematics qualifications considered for the Mathematics requirement.
Other Access courses considered individually, please contact admissions staff:
T: +44 (0) 28 9536 7890
E: admissionsbt@ulster.ac.uk
http://www.ulster.ac.uk/apply/entrance-requirements/equivalence.
GCSE/National 4/National 5
If offering GCE A Level Technology and Design, Design and Technology, Engineering, or Electronics must have GCSE Mathematics at Grade A (or equivalent) and GCSE English Language at Grade C (or equivalent) otherwise GCSE Grade C in Mathematics and English Language (or equivalent) is required.
Scottish Advanced HigherCCD
To include Mathematics and a science subject.
International Baccalaureate Diploma ProgrammeOffer: 25
To include 12 at Higher Level and to include minimum grade 5 in Higher Level Mathematics and a Higher Level science subject. Grade 4 in English Language also required in overall profile.
Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016)DMM
RQF Pearson BTEC Level 3 National Extended Diploma, award profile of DMM
Essential Subjects:
Pearson BTEC Level 3 National Extended Diploma in Engineering (RQF) (601/7588/6) to include Merit in Engineering Principles and Merit in Calculus to Solve Engineering Problems.
Pearson BTEC Level 3 National Extended Diploma in Electrical and Electronic Engineering (RQF) (601/7587/4) to include Merit in Engineering Principles and Merit in Calculus to Solve Engineering Problems.
We will also accept smaller BTEC/OCR qualifications (i.e. Diploma or Extended Certificate / Introductory Diploma / Subsidiary Diploma) in combination with A Levels or other acceptable level 3 qualifications.
Essential Subjects:
Pearson BTEC Level 3 National Diploma in Engineering, award profile DM (RQF) (601/7580/1) to include Merit in Engineering Principles and Merit in Calculus to Solve Engineering Problems.
Pearson BTEC Level 3 National Diploma in Electrical and Electronic Engineering, award profile DM (RQF) (601/7579/5) to include Merit in Engineering Principles and Merit in Calculus to Solve Engineering Problems.
Pearson BTEC Level 3 National Extended Certificate in Engineering (RQF) (601/7584/9) with Distinction overall, to include Merit in Engineering Principles.
The BTEC qualification must be in an Engineering subject area and/or the A Level must be in one of the specified subjects (see A Level section).
OCR/Cambridge Technical Combinations
OCR Nationals and OCR Cambridge Technicals do not satisfy the subject requirement for this course and will only be accepted when presented with an A Level in one of the specified subjects (please refer to A level section).
To find out if the qualification you are applying with is a qualification we accept for entry, please check our Qualification Checker - https://www.ulster.ac.uk/study/entrance-requirements/equivalence
We will also continue to accept QCF versions of these qualifications although grades asked for may differ. Check what grades you will be asked for by comparing the requirements above with the information under QCF in the Applied General and Tech Level Qualifications section of our Entry Requirements - https://www.ulster.ac.uk/study/entrance-requirements/undergraduate-entry-requirements
Leaving Certificate - Higher Level (Ireland) (first awarded in 2017)
112 UCAS tariff points to include a minimum of five subjects (four of which must be at higher level) to include English at H6 if studied at Higher level or O4 if studied at Ordinary Level.
Higher level subjects must include Mathematics at minimum grade H5 and one other HL subject at minimum grade H6 from Physics, Chemistry, Physics/Chemistry, Biology, Technology, Engineering, Technology and Design.
English language requirements for international applicants
The minimum requirement for this course is Academic IELTS 6.0 with no band score less than 5.5. Trinity ISE: Pass at level III also meets this requirement for Tier 4 visa purposes.
Ulster recognises a number of other English language tests and comparable IELTS equivalent scores.
Historical entry grades data
This section shows the range of grades that students who received offers were previously accepted on to this course with (learn more).
It is designed to support your research but does not guarantee whether you will or won't get a place.
Admissions teams consider various factors, including interviews, subject requirements, and entrance tests. Check all course entry requirements for eligibility.
Not enough data available
We are unable to show previous accepted grades for this course. This could be because the course is new, it's a postgraduate course, there isn't enough historical data, or the provider has opted out of sharing their entry grades data for this course - learn more.
Historical entry grades report
This report uses your grades to show how students with similar results have done when applying to this course in the past. Sometimes, there isn’t data for every possible set of grades. When that happens, universities and colleges occasionally fill in the gaps for sets of grades that are typically accepted.
Fees and funding
Tuition fees
Per year tuition fees
| Location | Fee | Year |
|---|---|---|
| England, Scotland, Wales & Channel Islands | £9790 | |
| Northern Ireland & Republic of Ireland | £4985 | |
| EU & International | £18030 |
Tuition fee status depends on a number of criteria and varies according to where in the UK you will study. For further guidance on the criteria for home or overseas tuition fees, please refer to the UKCISA website.
Additional fee information
Please note that for NI, ROI and GB, these are the fees for 2026/27. Fees for higher education programmes in NI are set by the Department for the Economy and the 2027/28 fees will not be released until later in the year. It is expected that there will be an inflationary increase from the 2026/27 fee.
Related courses
At Ulster University
Like this page